LEGRAND Raritan SRC-0100, User Manual

Page: 27 / 698

Chapter 3: Initial Installation and Configuration
15
Configuring the SRC
You can initially configure the SRC via one of the following:

A TCP/IP network that supports DHCP

A mobile device with PDView installed

A computer physically connected to the SRC
Configuration via a DHCP-enabled network:
1. Connect the SRC to a DHCP IPv4 network. See
Connecting the SRC
to Your Network
(on page 11).
2. Retrieve the DHCP-assigned IPv4 address. Use the front panel LCD
display to retrieve it. See
Device Info
(on page 86).
3. Launch a web browser to configure the SRC. See
Login
(on page 95).
Configuration via a connected mobile device:
1. Download the PDView app to your mobile device. See Connecting a
Mobile Device to SRC
(on page 16).
2. Connect the mobile device to SRC via USB.
3. Launch PDView to configure the SRC.
Configuration via a connected computer:
1. Connect the SRC to a computer. See
Connecting the SRC to a
Computer
(on page 21).
2. Use the connected computer to configure the SRC via the command
line or web interface.

Command line interface: See Initial Network Configuration via
CLI
(on page 657).

Web interface: Launch the web browser on the computer, and
type the link-local IP address or
pdu.local to access the SRC.
See
Login
(on page 95).
For link-local IP address retrieval, see Device Info (on page 86).
Tip: To configure a number of SRC devices quickly, see
Bulk
Configuration Methods
(on page 23).