Chapter 5: Introduction to SRC Components
86
Type - the asset strip type.
Numbering - the numbering mode. See
Asset Strip
(on page
Offset - the starting number of the rack unit numbering.
Orientation - the strip's orientation.
4.
Press
again to show a list of available tags and their
information.
When the list exceeds one page, the currently-selected main tag
and total of available main tags are indicated in the top-right
corner of the display.
If the desired tag is not visible, press
or
to scroll up or
down.
5.
If any blade extension strip is connected to this asset strip, select it
and Press
to view a list of available tags and asset IDs on this
extension strip.
Device Info
The display shows the device's information, network and IPv4/IPv6
settings through various pages. Page numbers are indicated in the
top-right corner of the LCD display.
To show the device information:
1.
Press
or
to select "Device Info" in the Main Menu, and
press
.
Device information similar to the following diagram displays.
2.
Device information like the device name, model name, firmware
version, and so on is displayed.
Summary of Contents for Raritan SRC-0100
