LEGRAND Raritan SRC-0100, User Manual

Page: 151 / 698

Chapter 6: Using the Web Interface
139
Mode Description
Asset Strip,
Raritan asset
strips,
LHX 20,
SHX 30,
LHX 40,
Power CIM
Force the SRC to show the selected device's
data/setup page regardless of the physical
connection status.
Note: 'LHX 20', 'SHX 30', and 'LHX 40' are not available when the support
of LHX/SHX heat exchangers is disabled. See
Miscellaneous
(on page
314).
Asset Strip
After connecting and detecting Raritan asset management strips (asset
strips), the SRC shows 'Asset Strip' in place of 'Feature Port' in the
menu.
Note: For connection instructions, see
Connecting Asset Management
Strips (on page 55).
To open the Asset Strip page, click it in the
Menu
(on page 104). On this
page, you can configure the rack units of asset strips and asset tags. A
rack unit refers to a tag port on the asset strips. The "Change Asset Strip
Configuration" permission is required.
For the functionality of this icon on the top-right corner, see
Feature
Port
(on page 137).
To configure asset strip and rack unit settings:
1. Click Edit Settings.