LEGRAND Raritan SRC-0100, User Manual

Page: 672 / 698

Appendix I: Additional SRC Information
660
To set or
enable Use this command
IP address
returned by
the DNS
server
network dns resolverPreference
<resolver>
<resolver> = preferV4 or preferV6

Static IP configuration:
To set Use this command
Static IPv4 or
IPv6 address
network <ipvX> interface <ETH>
address <ip address>
<ip address> = static IP address, with a
syntax similar to the example below.

Example:
192.168.7.9/24
Static IPv4 or
IPv6 gateway
network <ipvX> gateway <ip
address>
<ip address> = gateway's IP address
IPv4 or IPv6
primary DNS
server
network dns firstServer <ip
address>
<ip address> = DNS server's IP
address
IPv4 or IPv6
secondary
DNS server
network dns secondServer <ip
address>
<ip address> = DNS server's IP
address
IPv4 or IPv6
third DNS
server
network dns thirdServer <ip
address>
<ip address> = DNS server's IP
address
Commands for "Ethernet" authentication method:
To set or
enable Use this command
Authentication
method
network ethernet <ETH>
authMethod <method>
<method> =
none or eap