LEGRAND Raritan SRC-0100, User Manual

Page: 497 / 698

Chapter 8: Using the Command Line Interface
485
config:# authentication ldap add <host> <port> <ldap_type> <security>
<bind_type> <base_DN> <login_name_att> <user_entry_class>
"Optional
Parameters"
Note: "Optional Parameters" refer to one or multiple parameters listed
in the section
Optional Parameters (on page 485). They are required
only when your server settings need to specify these parameters. For
example, if setting the <bind_type> to "authenticatedBind", then you
must add the parameter "bindDN" to this command.
When the above command is successfully performed, a list of all LDAP
servers, including the newly-added one, will be displayed, which is
similar to the following diagram.
Tip: To verify all settings of a newly-added server, see
Authentication
Settings (on page 392).
Variables:

<host> is the IP address or host name of the LDAP server.

<port> is the port number assigned for communication with the
LDAP server.

<ldap_type> is one of the LDAP server types:
openldap or
activeDirectory.
Type Description
openldap
OpenLDAP server
activeDirectory
Microsoft Active Directory

<security> is one of the security options:
none, startTls or tls.
Type Description
none
No security
startTls
StartTLS
tls
TLS