LEGRAND Raritan SRC-0100, User Manual

Page: 515 / 698

Chapter 8: Using the Command Line Interface
503
config:# sensor externalsensor <n> <sensor type> lowerWarning <option>
Set the deassertion hysteresis for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> hysteresis <hy_value>
Set the assertion timeout for an environmental sensor:
config:# sensor externalsensor <n> <sensor type> assertionTimeout <as_value>
Variables:

<n> is the ID number of the environmental sensor that you want to
configure. The ID number is available in the SRC web interface or
using the command "
show externalsensors <n>
" in the CLI. It is
an integer starting at 1.

<sensor type> is one of the following numeric sensor types:
Sensor types Description
absoluteHumidity Absolute humidity sensors
relativeHumidity Relative humidity sensors
temperature Temperature sensors
airPressure Air pressure sensors
airFlow Air flow sensors
vibration Vibration sensors
Note: If the specified sensor type does not match the type of the
specified environmental sensor, this error message appears:
"Specified sensor type 'XXX' does not match the sensor's type
(<sensortype>)," where XXX is the specified sensor type, and
<sensortype> is the correct sensor type.

<option> is one of the options:
enable, disable or a numeric value.
Option Description
enable Enables the specified threshold for a specific
environmental sensor.