ANTENNA
(+) 12v Power Source
(-) 12v Ground
TECHNICAL SUPPORT
(864) 913-1999
Monday through Friday
9AM-4PM EST
sales
@quicktimeperformance.com
Operation Instructions
1.
To open the cutouts, hold
the
"
OPEN
"
button
until the desired exhaust sound is achieved. It
will
take approx. 5-6 seconds to open the valve
to the
full open position
.
2.
To close the cutouts, hold the
"
CLOSE
"
button
until the desired exhaust sound is achieved.
TIP
: For best results,
lubricate the cutout valve
butterflies at least
once a month
to keep them
free of debris and carbon build up.
intermediate wire
wireless receiver box
12v Power Input
12v Ground Input
Antenna Wire
LEGEND
PART # 10900
Wireless QTEC Controller
Thank you for your purchase of the Wireless QTEC Controller. This controller will support both single
and dual Quick Time Electric Cutout applications. Your kit comes with the wireless receiver and
2
key
fob style remote controllers.
Install Instructions:
1.
Find a suitable
,
secure,
dry
location for installation of the wireless control box.
Receiver m
ust be mounted
inside the vehicle
and wired to a fused ignition power source
or warranty will be voided.
Remember you will
need to
supply both a 12volt
ignition
power
source
as well as
a
ground.
BE SURE to run the Positive (Red
/+
) wire to your vehicle
's
12v hot source and the
G
round
(Black/-)
wire to a
suitable
ground on the chassis
.
Please note:
H
ooking these wires up backwards will damage the
receiver
!
2.
After securing the receiver and connecting power and ground
, h
ook up your intermediate wires between
the valves and receiver box. Be sure to route the intermediate wires so they don’t come into contact with your
exhaust system or any other area of the vehicle that could cause scraping & chaffing.
You
're
Done!
OPEN
CLOSE
