Installation, Operating & Maintenance Instructions
Series 75.0, DN 63-200 CF-F (I.D. 2½“- 8")
VAT Vakuumventile AG, CH-9469 Haag, Switzerland
Tel +41 81 771 61 61 Fax +41 81 771 48 30 [email protected]
www.vatvalve.com
280717EA
2009-03-05
1/12
Fast closing valve
with pneumatic actuator
This manual is valid for the valve ordering number(s):
75036- . E44- . . . .
75040- . E44- . . . .
75044- . E44- . . . .
75046- . E44- . . . .
The fabrication number is indicated on each product as per the label
below (or similar):
made in Sw itz er land
F abric ation N o.:
patented
. .
750 . . – . . . . – . . . . / . . . .
A – . . . . . .
Fabr icatio n n um be r
Explanation of symbols:
Read declaration carefully before you start any other
action!
Keep body parts and objects away from the valve
opening!
Attention!
Hot surfaces; do not touch!
Product is in conformity with EC guidelines,
if applicable!
Loaded springs and/or air cushions are potential
hazards!
Disconnect electrical power and compressed air
lines. Do not touch parts under voltage!
Wear gloves!
Read these «Installation, Operating & Maintenance Instructions» and the enclosed «General
Safety Instructions» carefully before you start any other action!
