October 2003
323734A-01
INSTALLATION GUIDE
Installing Your GPIB-SCSI-A
and NI-488.2 for Solaris
This document describes how to configure and connect the GPIB-SCSI-A to
your Sun SPARC system and how to install NI-488.2 for Solaris. The NI-488.2
software included in this kit is intended for use with Sun SPARC systems running
Solaris 2.6 or later. Other documentation, including the software reference
manual, is available on your NI-488.2 software for Solaris CD in the
\documentation
folder.
Before you install your GPIB controller, consult the manual that came with your
workstation for specific instructions and warnings. You must have superuser
privileges to install the hardware and software.
™
