GSM gate controller GV17
Short installation manual
You can use GV17 controller to remotely control gates, barriers and
other equipment.
Control the system with Protegus app, phone call or SMS.
Installation and wiring
Remove the upper cover, pull out
the terminal block connector.
Take out the PCB board from
the casing. Fix the casing to
chosen place with self-tapping
screws.
Place the PCB board back into the casing. Insert the terminal block.
Screw the GSM antenna to the antenna connector.
Place a Nano size SIM card to the SIM card slot.
!! It is necessary to disable the SIM card PIN code request before
inserting the SIM to GV17! You can do this using a mobile phone.
Alternatively, you can enter the SIM card PIN via TrikdisConfig
program using a USB.
This manual describes how to install GV17 without configuring it via USB.
If needed, using TrikdisConfig program or Protegus application you can:
-
Add and delete users (up to 990) and administrators (up to 7).
-
Check the events log.
Additionally, using TrikdisConfig program you can:
-
Set a schedule when users can control the system;
-
Set a counter for how many times certain users can control the
system;
-
Customize what SMS text will be sent after an input or output
is activated or restored.
-
Set dual purpose contacts to operate in input or output mode;
-
Set input type (NC, NO, EOL) and output type (pulse, level);
-
Turn on event reporting to security company receiver;
-
Etc.
Find the configuration program TrikdisConfig and product specifications
in
