background image

99.820.55 

1.6/05/05

D+H Mechatronic GmbH • Georg-Sasse-Str. 28-32 • D-22949 Ammersbek • Tel. +4940-60565219 • Fax +4940-60565264

Instruction for use

1

2

3

4

5

6

7

1

2

3

4

5

6

7

230VAC

power supply

drive group

2x group

3x group
optional

alarm

display

panel

detector

contacts

control

contact

of

external

system

2 x group

vent

button

2 x lines

smoke or

thermal

detector

2 x lines

smoke vent

button

rain

detector

2 x lines

Smoke Vent Control Panel RZN 4304/08-M

Installation

This system is designed to protect lives and safeguard valuable property!

Annual function check by manufacturer or duly authorized specialist.

Wiring, installation and functional testing only by qualified electrician.

The green pilot lights on the vent buttons must be lit up at all times,

otherwise refer to "Troubleshooting".

Rectify power failure without delay. Emergency power supplied for 72 hours.

Guarantee

You will get 

2 years 

guarantee for all D+H products from date of verified handing over of the

system up to maximal 3 years after date of delivery, when mounting and starting has been
carried out by a D+H authorized  

distributor

.

D+H guarantee is expired, with connection of D+H components with external systems or
with mixing of  D+H products with parts of other manufacturers.

Summary of Contents for RZN 4304













Reviews: