![background image](http://html.mh-extra.com/html/mitsubishi-electric/melsec-l-series/melsec-l-series_user-manual_238757856.webp)
14 - 58
Chapter 14 Common Functions
(5) Execute the connect/disconnect command to the A-axis for multiple-axis
servo amplifier.
(6) When using the driver communication function, it can be disconnected by
executing the connect/disconnect command, however it cannot be connected
again.
(7) The connect/disconnect/execute command cannot be accepted during
amplifier-less operation mode. "
Md.53
SSCNET control status
" will be "0:
Command accept waiting" (The disconnection is released.).
If being switched to the amplifier-less operation mode when "
Md.53
SSCNET
control status
" is "1: Disconnected axis existing", the disconnected axis is
automatically connected when switching to the normal operation mode again.
If being switched to the amplifier-less operation mode when "
Md.53
SSCNET
control status
" is "-1: Execute waiting", the connect/disconnect command
becomes invalid.
[3] Buffer memory list
The buffer memory for the connect/disconnect function of SSCNET
communication is shown below.
(1) System control data
Setting item
Setting
value
Setting details
Buffer memory address
LD77MS2
LD77MS4
LD77MS16
Cd.102
SSCNET control
command
The connect/disconnect command of SSCNET
communication is executed.
0
: No command
Axis No.
(Note-1)
: Disconnect command of
SSCNET communication
(Axis No. to be
disconnected)
-2
: Execute command
-10
: Connect command of
SSCNET communication
Except above setting: Invalid
(Note-1): LD77MS2 : 1 to 2,
LD77MS4 : 1 to 4,
LD77MS16: 1 to 16
1932 5932
Summary of Contents for MELSEC-L Series
