background image

Options for ABB drives, converters and inverters

Quick installation and start-up guide

FPBA-01 PROFIBUS DP adapter module

Safety instructions

WARNING

! Obey the safety instructions. If you ignore them, injury or death, or damage to the 

equipment can occur. See the user’s manual.

Mechanical installation

Electrical installation

Layout of the module

1. Pull out the lock.

2. Install the module carefully to an option 

module slot of the drive. See the drive 
hardware manual.

3. Push in the lock.

4. Tighten the screw to torque 0.8 N·m using 

a Torx TX10 screwdriver. 

WARNING

! Do not use excessive force, 

or leave the screw too loose. Over-
tightening can damage the screw or 

module. A loose screw decreases the EMC 
performance, and can even cause an operation 
failure.

1

3

4

No.

Description

1

Lock

2

Mounting and grounding screw

3

Bus connector [X1]

4

Diagnostic LEDs

4

3

2

1

Reviews: