1 - 25
Chapter 1 Product Outline
The following work is carried out with the processes shown on the previous page.
Details
Reference
1)
Understand the product functions and usage methods, the configuration devices
and specifications required for positioning control, and design the system.
Chapter 1
Chapter 2
Chapter 3
Chapter 8 to Chapter 14
2)
Install the Simple Motion module onto the CPU module, wire the Simple Motion
module and external connected devices (servo amplifier, etc.) and wire the PLC
CPU and peripheral devices.
Chapter 4
3)
Using GX Works2, set the servo parameters, parameter, positioning data, block
start data and condition data required for the positioning control to be executed.
Chapter 5
Chapter 8 to Chapter 14
Simple Motion Module Setting
Tool Help
4) Using GX Works2, create the sequence program required for positioning operation.
Chapter 6
GX Works2 Version1
Operating Manual (Common)
5)
Write the parameters and positioning data, etc., created with GX Works2 into the
Simple Motion module.
Chapter 7
Simple Motion Module Setting
Tool Help
6) Using GX Works2, write the created sequence program into the PLC CPU.
Chapter 7
GX Works2 Version1
Operating Manual (Common)
7)
Carry out test operation and adjustments in the test function of GX Works2 to
check the connection with the Simple Motion module and external connected
device, and to confirm that the designated positioning operation is executed
correctly. (Debug the set "parameters" and "positioning data", etc.)
Chapter 14
Simple Motion Module Setting
Tool Help
8)
Carry out test operation and adjustment to confirm that the designated positioning
operation is executed correctly. (Debug the created sequence program.)
GX Works2 Version1
Operating Manual (Common)
9)
Actually operate the positioning operation. At this time, monitor the operation state
as required. If an error or warning occurs, remedy.
Chapter 5
Chapter 16
Simple Motion Module Setting
Tool Help
GX Works2 Version1
Operating Manual (Common)
10) Maintenance of the Simple Motion module as required.
Chapter 4
11) Dispose of the Simple Motion module.
Chapter 4
Summary of Contents for MELSEC-L Series
