5 - 112
Chapter 5 Data Used for Positioning Control
Da.23
Number of simultaneous starting axes
LD77MS16
Set the number of simultaneous starting axes to execute the simultaneous start.
2: Simultaneous start by 2 axes of the starting axis and axis set in "
Da.24
Simultaneous starting axis No.1
".
3: Simultaneous start by 3 axes of the starting axis and axis set in "
Da.24
Simultaneous starting axis No.1
" and "
Da.25
Simultaneous starting axis No.2
".
4: Simultaneous start by 4 axes of the starting axis and axis set in "
Da.24
Simultaneous starting axis No.1
" to "
Da.26
Simultaneous starting axis No.3
".
Da.24
Simultaneous starting axis No.1 to
Da.26
Simultaneous starting axis
No.3
LD77MS16
Set the simultaneous starting axis to execute the 2 to 4-axis simultaneous start.
• 2-axis interpolation ......... Set the target axis number in "
Da.24
Simultaneous
starting axis No.1
".
• 3-axis interpolation ......... Set the target axis number in "
Da.24
Simultaneous
starting axis No.1
" and "
Da.25
Simultaneous starting axis
No.2
".
• 4-axis interpolation ......... Set the target axis number in "
Da.24
Simultaneous
starting axis No.1
" to "
Da.26
Simultaneous starting axis
No.3
".
Set the axis set as simultaneous starting axis.
0: Axis 1
8: Axis 9
1: Axis 2
9: Axis 10
2: Axis 3
A: Axis 11
3: Axis 4
B: Axis 12
4: Axis 5
C: Axis 13
5: Axis 6
D: Axis 14
6: Axis 7
E: Axis 15
7: Axis 8
F: Axis 16
Note)
• Do not specify the own axis number. (If you do, the error "Condition data
error" (error code: 533) will occur during the program execution.)
• When the same axis number or axis number of own axis is set to
multiple simultaneous starting axis number, the error "Condition data
error" (error code: 533) will occur during the program execution.
• Do not specify the simultaneous starting axis No.2 and simultaneous
starting axis No.3 for 2-axis simultaneous start, and not specify the
simultaneous starting axis No.3 for 3-axis simultaneous start.
The setting value is ignored.
Summary of Contents for MELSEC-L Series
