![background image](http://html.mh-extra.com/html/mitsubishi-electric/melsec-l-series/melsec-l-series_user-manual_238757064.webp)
2 - 4
Chapter 2 System Configuration
[External input wiring connector]
Part name
Specification
Applicable connector
LD77MHIOCON
Applicable wire size
AWG30 to AWG24 (0.05 to 0.2 mm
2
)
(Note-3)
(Note-3): AWG24 (0.2mm
2
) is recommended.
Specifications of recommended manual pulse generator
Item Specification
Model name
MR-HDP01
Ambient temperature
-10 to 60°C (14 to 140°F )
Pulse resolution
25PLS/rev (100 PLS/rev after magnification by 4)
Output method
Voltage-output, Output current Max. 20mA
Power supply voltage
4.5 to 13.2VDC
Current consumption
60mA
Output level
"H" level : Power supply voltage
(Note-1)
-1V or more (in no load)
"L" level : 0.5V or less (with maximum leading-in)
Life time
1000000 revolutions (at 200r/min)
Permitted axial loads
Radial load: Max. 19.6N
Thrust load: Max. 9.8N
Weight 0.4
[kg]
Number of max. revolution
Instantaneous Max. 600r/min. normal 200r/min
Pulse signal status
2 signals: A phase, B phase, 90° phase difference
Start friction torque
0.06N•m (20°C (68°F))
(Note-1): If a separate power supply is used, use a stabilized power supply of voltage 5VDC ± 0.25V.
Summary of Contents for MELSEC-L Series
