Mazda MX-6 1998, Workshop Manual

Page: 1231 / 1282

LIGHTING SYSTEMS
HAZARD WARNING SWITCH INSPECTION
1. Remove the hazard warning switch. (Refer to
09-18 HAZARD WARNING SWITCH
REMOVAL/INSTALLATION.)
2. Check for continuity between the hazard warning
switch terminals by using an ohmmeter.
Switch position
Terminal
A B C D
Off
0 — ® — o
On
O
----
— O
o — o
W 6 U 9 1 8 W B 7
W 6 U 9 1 8 W 1 6
n n
D
c
B A
W 6 U 9 1 8 W A H
3. If not as specified, replace the hazard warning
switch.
HEADLIGHT HIGH RELAY REMOVAL/INSTALLATION
W 6 U 9 1 8 W 1 7
Canada Only 5. Install in the reverse order of removal.
1. Disconnect the negative battery cable.
2. Remove the nuts to move the main fuse block to
the side.
3. Disconnect the connector.
4. Remove the headlight high relay.
HEADLIGHT HIGH RELAY INSPECTION
W 6 U 9 1 8 W 1 8
Canada Only
1. Remove the headlight high relay. (Refer to 09-18
HEADLIGHT HIGH RELAY
REMOVAL/INSTALLATION.)
2. Check for continuity between the headlight high
relay terminals by using an ohmmeter.
O O : Continuity
Step
Terminal
A F B E
1
0 ------ -JL- 0
2 B+ GND
O----- — O
W 6 U 9 1 8 W B 8
W 6 U 9 1 8 W A K
3. If not as specified, replace the headlight high
relay.
•s
■ * '¡m J
0 9 -1 8 -8