Mazda MX-6 1998, Workshop Manual

Page: 888 / 1282

ENGINE SPEED SENSING POWER STEERING
Steering Lock Mounting Bolts And Bracket
Assembly Note
1. Assemble the steering lock component.
2. Put the key into the steering lock component and
verify that the lock operates correctly.
3. Install new steering lock mounting bolts.
4. Tighten the bolts until the heads break off.
W 6 U 6 1 2 W A B
STEERING SHAFT INSPECTION
• Inspect for the following and replace the steering
shaft component as necessary.
1. Column bearing rotates smoothly and there is no
damage.
2. Steering shaft length is within the specification.
W 6 U 6 1 2 W 0 6
3. Tilt operation
(1) Verify that the adjusting lever moves smoothly
from unlock position to lock position.
(2) Verify that the steering shaft is fixed firmly
when the adjusting lever is locked.
Length
516.4 mm {20.33 in}
W 6 U 6 1 2 W A D
W 6 U 6 1 2 W A C
STEERING LOCK (ATX MODEL) INSPECTION
• Verify that the cable connector does not move
when the key is in the LOCK position and that it
moves freely with the key in other positions.
W 6 U 6 1 2 W 0 7
W 6 U 6 1 2 W A E
0 6 -1 2 -6