Mazda MX-6 1998, Workshop Manual

Page: 1228 / 1282

LIGHTING SYSTEMS
BACK-UP LIGHT SWITCH REMOVAL/INSTALLATION
W 6 U 9 1 8 W 0 9
1. Disconnect the negative battery cable. 4. Install in the reverse order of removal.
2. Disconnect the connector.
3. Remove the back-up light switch.
BACK-UP LIGHT SWITCH INSPECTION
1. Disconnect the back-up light switch connector.
2. Check for continuity between the back-up light
switch terminals by using an ohmmeter.
O O : Continuity
Shift lever position
Terminal
A B
Reverse
O----------- --------- O
Other
W 6 U 9 1 8 W B 4
W 6 U 9 1 8 W 1 0
A B
W 6 U 9 1 8 W A A
3. If not as specified, replace the back-up light
switch.
COMBINATION SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the driver-side air bag module. (Refer to
08 -1 0 DRIVER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION.)
3. Remove the steering wheel. (Refer to 06-12
STEERING WHEEL AND COLUMN
REMOVAL/INSTALLATION.)
4. Remove the column cover.
5. Remove the clock spring. (Refer to 08-10 CLOCK
SPRING ADJUSTMENT.)
6. Remove in the order indicated in the figure.
7. Install in the reverse order of removal.
W 6 U 9 1 8 W 1 1
1 Connector
2 Screw
3 Combination switch
0 9 -1 8 -5