Mazda MX-6 1998, Workshop Manual

Page: 456 / 1282

INTAKE-AIR SYSTEM [FS]
INTAKE-AIR SYSTEM REMOVAL/INSTALLATION [FS]
W 6 U 1 1 3 W 0 2
Warning
•
When the engine and intake-air system are hot, they can badly burn. Turn off the engine and wait
until they are cool before removing or installing the intake-air system.
1. Disconnect the negative battery cable.
2. Drain the engine coolant from radiator. (Refer to 01-12 COOLING SYSTEM SERVICE WARNING.) (Refer to
01-12 ENGINE COOLANT REPLACEMENT.)
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
5. Refill the engine coolant to radiator. (Refer to 01-12 COOLING SYSTEM SERVICE WARNING.) (Refer to
10-12 ENGINE COOLANT REPLACEMENT.)
1 Fresh-air duct
2 Air cleaner
3 Air cleaner element
4
Mass air flow sensor
5 Air hose
6 Resonance chamber
7 Accelerator cable
8 Throttle body
9
IAC valve
10 Intake manifold
zr
Removal Note
c r Installation Note
11 Purge solenoid valve
12 PRC solenoid valve
13 EGR boost sensor solenoid valve
14 Intake air temperature sensor
0 1 -1 3 A -2