TROUBLESHOOTING [ENGINE CONTROL KL]
2
W ILL NOT CRANK
DESCRIPTION
Starter does not work
POSSIBLE
CAUSE
• Open starter circuit between ignition switch and starter
• Transaxle range switch malfunction (ATX)
• Transaxle range switch misadjustment (ATX)
• Starter interlock switch malfunction (MTX)
• Starter malfunction
• Seized/hydrolocked engine, flywheel or drive plate
STEP
INSPECTION
ACTION
1
Verify following(s):
• Battery connection.
• Automatic transaxle in Park or Neutral.
Yes
Go to next step.
• Clutch fully depressed (MTX).
• Fuses.
Are all items okay?
No
Service as necessary and repeat step 1.
2
Is clicking sound heard from starter when
Yes
Go to next step.
ignition switch is turned to START?
No
Go to step 3.
3
Check starting system.
tr
0 1 -1 9 STARTER INSPECTION
Is starting system okay?
Yes
Check for seized/hydrolocked engine, flywheel or drive
plate.
c r 01-10B ENGINE COMPLETE [KL]
No
Service as required.
4
Do any other electrical accessories work?
Yes
Go to next step.
No
Check charging system.
a-
0 1 -1 7 GENERATOR INSPECTION
5
Note
• Following test should be performed on
automatic transaxles only. For manual
transaxles, go to next step.
Yes
Go to next step.
Connect NGS tester to DLC.
Access CPP/PNP PID.
Turn ignition switch on.
Is CPP/PNP PID indicated ON when selecting
P or N range?
No
Check for adjustment of transaxle range switch. If
transaxle range switch is adjusted properly, check for
open circuit of transaxle range switch and related circuit.
6
Retrieve and record any continuous memory
DTCs.
Yes
DLC displayed.
Go to appropriate DTC test.
Is any continuous memory DTC displayed?
No
No DTC displayed.
Go to next step.
7
Retrieve and record any KOEO DTCs.
Is any DTC displayed during KOEO
Yes
DTC displayed.
Go to appropriate DTC test.
inspection?
No
No DTC displayed.
Check following:
• START circuit in ignition switch.
• Open circuit between ignition switch and starter.
• Starter interlock switch (MTX).
8
Verify test results. If okay, return to diagnostic index to service any additional symptoms.
0 1 -0 1 B -1 3 4
Summary of Contents for MX-6 1998
