Mazda MX-6 1998, Workshop Manual

Page: 840 / 1282

AUTOMATIC TRANSAXLE [LA4A-EL]
DRIVE PLATE REMOVAL/INSTALLATION [LA4A-EL]
W 6 U 5 1 7 W 1 3
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
{kgf-m , ft-lbf}
W 6 U 5 1 7 W C N
1
Drive plate mounting bolts
p - Removal Note
tr Installation Note
2 Backing plate
3 Drive plate
4
Adapter
Drive Plate Mounting Bolts Removal Note
1. Set the SST or equivalent against the drive plate.
2. Remove the bolts and the drive plate.
Drive Plate Mounting Bolts Installation Note
1. Remove any old locking compound from the bolt
threads and bolt holes, and apply new locking
compound to the bolt threads.
2. Set the SST or equivalent against the drive plate.
3. Tighten the drive plate mounting bolts in two or
three steps in the order shown.
Tightening torque
97— 102 N-rn
{9.8— 10.5 kgf-m, 70.9— 75.9 ft-lbf}
W 6 U 5 1 7 W C Q
W 6 U 5 1 7 W C P
0 5 -1 7 A -3 5