Mazda MX-6 1998, Workshop Manual

Page: 1223 / 1282

INTERIOR TRIM
12. Slide the seat back to the maximum rearward
position.
13. Recline both seat backs to the maximum reclined
position.
14. Slide the headliner towards the rear of the vehicle
to disengage the headliner hook A from the roof.
15. Remove the headliner from the vehicle through
the passenger’s side front door at a 45° angle,
with the right edge at the lower right corner and
the left edge at the upper left corner of the door
opening.
16. Install in the reverse order of removal.
FLOOR COVERING REMOVAMNSTALLATION
1. Disconnect the negative battery cable.
2. Remove the front seat. (Refer to 09-13 FRONT
SEAT REMOVAMNSTALLATION.)
3. Remove the rear seat cushion.
4. Remove the dashboard. (Refer to 09-17
DASHBOARD REMOVAMNSTALLATION.)
5. Remove the B-pillar lower trim. (Refer to 09-17
B-PILLAR LOWER TRIM
REMOVAMNSTALLATION.)
6. Remove the selector cable and the interlock cable
if equipped with ATX. (Refer to 0 5 -1 4 SHIFT
MECHANISM REMOVAMNSTALLATION.)
7. Remove the SAS unit bracket. (Refer to 08-10
SAS UNIT BRACKET
REMOVAMNSTALLATION.)
8. Remove the set plate. (Refer to 06-12
STEERING WHEEL AND COLUMN
REMOVAMNSTALLATION.)
9. Remove the audio amplifier. (Refer to 09-20
AUDIO AMPLIFIER REMOVAMNSTALLATION.)
10. Remove the fasteners.
11. Disengage the side hooks to remove the floor
covering.
W 6 U 9 1 7 W 3 2
FASTENER
W 6 U 9 1 7 W A Z
12. Install in the reverse order of removal.
09
-
17-15
^