Mazda MX-6 1998, Workshop Manual

Page: 877 / 1282

AUTOMATIC TRANSAXLE SHIFT MECHANISM
Connector Disassembly Note
1. Insert a thin piece of metal from the terminal side
of the connector, and lift up the terminal locking
tab.
2. Pull the terminal out of the connector.
W 6 U 5 1 8 W A P
indicator Panel Assembly Note
1. Shift the selector lever to P position.
2. Align the alignment screws in the slider with the
holes in the indicator panel. Install heavy-gauge
wire to hold the slider.
W 6 U 5 1 8 W A Q
3. Temporarily install the indicator panel to the
selector lever bracket.
4. Tighten the indicator panel screws in the order
shown in the figure.
Tightening torque
2.0— 2.9 N-m {20— 30 kgf-cm, 18— 26 in-lbf}
W 6 U 5 1 8 W A R
5. Remove the heavy gauge wire.
6. Verify that the selector lever properly aligns with
the indicator panel in all ranges and positions.
0 5 -1 8 -7