Mazda MX-6 1998, Workshop Manual

Page: 1195 / 1282

SLIDING SUNROOF
4. Install the guide to the sunroof frame by sliding it
forward until reaches to the end of rail.
W 6 U 9 1 5 W A 7
5. Adjust the drive unit, and insert an approximately
3.0 mm {0.12 in} diameter screwdriver or
equivalent tool to align the drive unit with the
guide.
6. Install the sunroof motor. (Refer to 09-15
SUNROOF MOTOR INSTALLATION.)
7. Slide the drip rail guide forward, and install it to
the sunroof frame.
8. Push the drip rail guide downward to engage pins
A and B to the guide.
W 6 U 9 1 5 W A 9
9. Slide the sunshade forward, and install it to the
sunroof frame.
10. Install the screws.
DEFLECTOR REMOVAL/INSTALLATION
1. Fully open the glass panel.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
W 6 U 9 1 5 W 0 4
1
Screw
2 Rivet
D- Removal Note
cr Installation Note
3
Deflector
PIN B
DRIP RAIL GUIDE
PINA
0 9 -1 5 -3