Mazda MX-6 1998, Workshop Manual

Page: 959 / 1282

TROUBLESHOOTING [AIR BAG SYSTEM]
STEP
INSPECTION ACTION
Turn ignition switch to LOCK.
Disconnect negative battery cable and wait for
more than 1 minute to allow backup power
supply of SAS unit to deplete its stored power.
Disconnect clock spring connector.
Remove rear console.
c 0 9 -1 7 REAR CONSOLE
REMOVAL/INSTALLATION
Remove driver-side side wall.
Disconnect SAS unit connector.
Inspect wiring harness between terminal K of SAS
unit connector and terminal A of passenger-side
air bag module connector and between terminal I
of SAS unit connector and terminal B of
passenger-side air bag module connector for
following:
• Short to ground
• Short to power supply
• Open circuit
Is wiring harness okay?
n m n M r
W 6 U 8 0 1 W A G
Yes Replace SAS unit.
D- 0 8-10 SAS UNIT REMOVAL/INSTALLATION
No
Replace dash harness of air bag system.
0 8 -0 1 A -9