Mazda MX-6 1998, Workshop Manual, Page: 662 / 1282

CONVENTIONAL BRAKE SYSTEM
Brake Drum Removal Note
• Mark the wheel hub bolt and brake drum before
removal for reference during installation.
Brake Drum Installation Note
1. Before brake drum installation, inspect the auto
adjuster by depressing the brake pedal.
2. Remove any rust or grime on the contact face of
the drum brake.
3. Install the brake drum and align the marks made
before removal.
W 6 U 4 1 1 W B J
WHEEL CYLINDER DISASSEMBLY/ASSEMBLY
Caution
•
Replace the wheel cylinder assembly if a problem is found.
W 6 U 4 1 1 W 2 2
1. Disassemble in the order indicated in the table.
2. Assemble in the reverse order of disassembly.
' 49 0259 770B
N m {k g fc m , in lb f)
W 6 U 4 1 1 W B K
1 Boot
2 Wheel cylinder piston
3 Piston cup
4 Wheel cylinder spring and cap
5 Rubber cap and bleeder screw
6
Wheel cylinder body
0 4 -1 1 -2 1