Mazda MX-6 1998, Workshop Manual, Page: 596 / 1282

FRONT AXLE
Locknut Removal Note
1. Knock the crimped portion of the locknut outward
by using a small chisel and a hammer.
2. Lock the hub by applying the brakes.
3. Remove the locknut.
Wheel Bearing Removal Note
• Remove the wheel bearing by using the SSTs.
W 6 U 3 1 1 W A 7
W 6 U 3 1 1 W A 4
Dust Cover Removal Note
Wheel Hub Component Removal Note
1. Remove the wheel hub component by using the
SSTs.
2. If the bearing inner race remains on the front
wheel hub component, grind a section of the
bearing inner race until approx. 0.5 mm {0.02 in}
remains. Then remove it by using a chisel.
Note
• The dust cover does not need to be removed
unless replacing it.
1. Mark the dust cover and steering knuckle for
proper installation.
W 6 U 3 1 1 W A 8
2. Remove the dust cover by using a chisel.
0 3 -1 1 -3