Mazda MX-6 1998, Workshop Manual, Page: 953 / 1282

TROUBLESHOOTING [AIR BAG SYSTEM]
Inspection of Diagnostic Trouble Codes
DTC 1 SAS unit connector poor connection
DETECTION
CONDITION
No continuity between poor connection detector bar of SAS unit.
POSSIBLE
CAUSE
• SAS unit connector malfunction
• Poor connection
STEP INSPECTION ACTION
1
Warning
• Handling the SAS unit im properly can
accidently deploy the air bag modules
which may cause serious injury. Read AIR
BAG SYSTEM SERVICE WARNINGS before
handling the SAS unit.
v 08-10 AIR BAG SYSTEM SERVICE
WARNINGS
Turn ignition switch to LOCK.
Disconnect negative battery cable and wait for
more than 1 m inute to allow the backup power
supply of SAS unit to deplete its stored power.
Remove rear console.
tr 0 9-17 REAR CONSOLE
REMOVAL/INSTALLATION
Remove driver-side side wall.
Is SAS unit connector securely connected?
Yes Go to next step.
\ \
N
' ) A l . t r - II
No Connect connector properly.
'O»
-1 W6U801WA6
2 Disconnect SAS unit connector.
Is SAS unit connector okay?
Yes Replace SAS unit.
c r 0 8-10 SAS UNIT REMOVAL/INSTALLATION
No
Replace dash harness of air bag system.
08
DTC 2 SAS unit
DETECTION
CONDITION
Malfunction in SAS unit circuit.
POSSIBLE
CAUSE
• SAS unit malfunction
STEP INSPECTION
ACTION
— — —
Replace SAS unit.
tr 0 8 -1 0 SAS UNIT REMOVAL/INSTALLATION
0 8 -0 1 A -3