Mazda MX-6 1998, Workshop Manual, Page: 1173 / 1282

SECURITY AND LOCKS
REAR DOOR LOCK STRIKER ADJUSTMENT
1. Verify that the rear door can be closed easily and
that there is no looseness.
2. If not correct, loosen the rear door lock striker
installation screws and move the striker
horizontally or vertically.
W 6 U 9 1 4 W 0 7
3. Tighten the rear door lock striker installation
screws.
REAR DOOR LOCK STRIKER REMOVAL/INSTALLATION
1. Remove the screws.
2. Remove the rear door lock striker.
W6U914W08
3. Install in the reverse order of removal.
4. Adjust the rear door lock striker. (Refer to 09-14
REAR DOOR LOCK STRIKER ADJUSTMENT.)
DOOR LOCK SWITCH REMOVAL/INSTALLATION
1. Disconnect the negative battery cable.
2. Remove the driver’s side front door trim. (Refer to
0 9 -1 7 FRONT DOOR TRIM
REMOVAL/INSTALLATION.)
3. Remove in the order indicated In the table.
4. Install in the reverse order of removal.
W 6 U 9 1 4 W 0 9
W6U914WA8
1 S c r e w
2
D o o r lo c k s w itc h
0 9 -1 4 -5