Mazda MX-6 1998, Workshop Manual, Page: 1108 / 1282

TROUBLESHOOTING [INSTRUMENTATION/DRIVER INFO.]
STEP INSPECTION
ACTION
Check for continuity between terminal C at
fuel pump connector of wiring harness and
ground.
Is there continuity?
W 6 U 9 0 1 W U S
Yes Go to next step.
No Repair wiring harness between fuel gauge sender unit and
ground.
Disconnect print plate connector.
Check for continuity between terminal 2E
(14-pin) at print plate and print plate connector
4F (8-pin) terminal.
Is there continuity?
Yes Go to next step.
No Replace print plate.
c r 0 9 -2 2 INSTRUMENT CLUSTER
DISASSEMBLY/ASSEMBLY
W 6 U 9 0 1 W U U
Remove fuel gauge sender unit.
Inspect fuel gauge sender unit.
c r 0 9-22 FUEL GAUGE SENDER UNIT
INSPECTION
is fuel gauge sender unit okay? _________
Yes Replace display unit assembly.
c r 0 9 -2 2 INSTRUMENT CLUSTER
DISASSEMBLY/ASSEMBLY
No
Replace fuel gauge sender unit.
0 9 -0 1 P -1 2