Mazda MX-6 1998, Workshop Manual

Page: 1239 / 1282

WIPER/WASHER SYSTEMS
09-19 WIPER/WASHER SYSTEMS
WINDSHIELD WIPER ARM AND BLADE
ADJUSTMENT ......................................... 09-19-1
WINDSHIELD WIPER ARM AND BLADE
REM OVAL/INSTALLATION....................09-19-1
Windshield W iper Arm Installation Note 09-19-1
WINDSHIELD WIPER LINK
REMOVAL/INSTALLATION ....................0 9 -1 9 -2
WINDSHIELD WIPER MOTOR
REM OVAL/INSTALLATION....................0 9 -1 9 -2
WINDSHIELD WIPER MOTOR
IN S P E C TIO N ............................................. 0 9 -1 9 -3
WINDSHIELD WASHER TANK
REMOVAL/INSTALLATION ....................0 9 -1 9 -4
WINDSHIELD WASHER MOTOR
REM OVAL/INSTALLATION....................0 9 -1 9 -4
WINDSHIELD WASHER MOTOR
IN S P E C TIO N ............................................. 0 9 -1 9 -5
WASHER FLUID-LEVEL SENSOR
REMOVAL/INSTALLATION.................... 0 9 -1 9 -5
WASHER FLUID-LEVEL SENSOR
IN SPEC TIO N ...................................... 0 9 -1 9 -5
WINDSHIELD WIPER AND WASHER SWITCH
REMOVAL/INSTALLATION....................0 9 -1 9 -6
WINDSHIELD WIPER AND WASHER SWITCH
INSPEC TIO N ............................................. 0 9 -1 9 -6
WINDSHIELD WASHER NOZZLE
ADJUSTMENT ......................................... 0 9 -1 9 -7
WINDSHIELD WASHER NOZZLE
R E M O V A L ................................................. 0 9 -1 9 -7
WINDSHIELD WASHER NOZZLE
INSTALLATION ....................................... 0 9 -1 9 -7
WINDSHIELD WASHER PIPE
REMOVAL/INSTALLATION.................... 0 9 -1 9 -8
W INDSHIELD WIPER ARM AND BLADE ADJUSTMENT
1. Operate the windshield wiper motor to set the
wipers in the park position.
2. Set the windshield wiper arm height as shown.
WINDSHIELD WIPER ARM AND BLADE REMOVAL/INSTALLATION
W 6 U 9 1 9 W 0 2
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
3. Adjust the windshield wiper arm and blade. (Refer
to 09 -1 9 WINDSHIELD WIPER ARM AND
BLADE ADJUSTMENT.)
4 Windshield wiper blade
5
Rubber brush
Windshield Wiper Arm Installation Note
• Clean the windshield wiper arm connector shafts
by using a wire brush before installing the
windshield wiper arms.
WINDSHIELD WIPER
ARM CONNECTOR SHAFT
1 Cap
2 Nut
3
Windshield wiper arm
tar Installation Note
W 6 U 9 1 9 W A 2
0 9 -1 9 -1