Mazda MX-6 1998, Workshop Manual, Page: 671 / 1282

ANTILOCK BRAKE SYSTEM
Voltage Pattern Inspection
1. On level ground, jack up the vehicle and support it
evenly on safety stands.
2. Disconnect the ABS wheel-speed sensor
connector and connect an oscilloscope to the
sensor connector.
3. Inspect for voltage pattern by rotating it at one
revolution per second.
W 6 U 4 1 3 W A D
REAR ABS WHEEL-SPEED SENSOR REMOVAL/INSTALLATION
W 6 U 4 1 3 W 0 6
1. Remove the trunk compartment covering. (Refer to 09-17 TRUNK COMPARTMENT COVERING
REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
7.9— 10.7 N m
{80— 110 k g fc m , 69.5— 95.4 in lb f)
2)
19—25 {1.9— 2.6,14— 19}
19— 25 {1.9— 2.6,14— 19}
W 6 U 4 1 3 W A C
1 Connector
2 Bolt
Rear ABS wheel-speed sensor
REAR ABS WHEEL-SPEED SENSOR INSPECTION
W 6 U 4 1 3 W 0 7
• Inspect the rear ABS wheel-speed sensor in the
same procedure as the front sensor. (Refer to
FRONT ABS WHEEL-SPEED SENSOR
INSPECTION.)
0 4 -1 3 -7