manualshive.com logo in svg

Mazda MX-6 1998, Workshop Manual

Get your hands on the Mazda MX-6 1998 Workshop Manual for free download. This comprehensive manual provides detailed instructions for maintaining and repairing your vehicle. Access it easily from manualshive.com to ensure you have the information you need to keep your Mazda running smoothly.

Share
Download
background image

ALPHABETICAL INDEX

R E A R   W H E E L  A L IG N M E N T   ........................   0 2 - 1 1 - 2
R E A R   W IN D O W   D E F R O S T E R   R E LA Y

IN S P E C T IO N ..................................................... 0 9 - 1 2 - 1 6

R E A R   W IN D O W   D E F R O S T E R   R E LA Y

R E M O V A L /IN S T A L L A T IO N ...........................0 9 - 1 2 - 1 6

R E A R   W IN D O W   D E F R O S T E R   S W IT C H

IN S P E C T IO N ..................................................... 0 9 - 1 2 - 1 6

R E A R   W IN D O W   D E F R O S T E R   S W IT C H

R E M O V A L /IN S T A L L A T IO N ...........................0 9 - 1 2 - 1 5

R E A R  W IN D O W   D E F R O S T E R   S Y M P T O M

T R O U B L E S H O O T IN G ................................. 0 9 - 0 1 B -1

R E A R   W IN D O W   G L A S S   IN S T A L L A T IO N   0 9 -1 2 -1 1

R E A R   W IN D O W   G L A S S   R E M O V A L ..............0 9 - 1 2 - 9
R E A R   W IN D O W   M O L D IN G

IN S T A L L A T IO N ................................................... 0 9 - 1 6 - 5

R E A R   W IN D O W   M O L D IN G   R EM O V AI_____ 0 9 - 1 6 - 5
R E A R V IE W   M IR R O R   IN S T A L L A T IO N   . . .   0 9 - 1 2 - 1 9
R E A R V IE W   M IR R O R   R E M O V A L   ................0 9 - 1 2 - 1 9
R E F R IG E R A N T  C H A R G IN G   ........................... 0 7 - 1 0 - 3
R E F R IG E R A N T   L IN E S

R E M O V A L /IN S T A L L A T IO N ........................   0 7 -1 1 -1 1

R E F R IG E R A N T  P R E S S U R E   C H E C K   . . . .   0 7 - 1 0 - 2  
R E F R IG E R A N T   P R E S S U R E   S W IT C H

IN S P E C T IO N ...................................................   0 7 - 4 0 - 1 3

R E F R IG E R A N T   P R E S S U R E   S W IT C H

R E M O V A L /IN S T A L L A T IO N ........................   0 7 - 4 0 - 1 2

R E F R IG E R A N T  S Y S T E M   G E N E R A L

P R O C E D U R E S ................................................... 0 7 - 1 0 - 2

R E F R IG E R A N T  S Y S T E M   P E R F O R M A N C E

T E S T   ......................................................................   0 7 - 1 0 - 2

R E F R IG E R A N T  S Y S T E M   S E R V IC E

C A U T IO N S   .......................................................... 0 7 - 1 0 - 1

R E F R IG E R A N T  S Y S T E M   S E R V IC E

W A R N IN G S .......................................................... 0 7 - 1 0 - 1

R E G U L A T O R   H A N D L E   IN S T A L L A T IO N   . .   0 9 - 1 2 - 9

R E G U L A T O R   H A N D L E   R E M O V A L ................0 9 - 1 2 - 8

R E S IS T O R   IN S P E C T IO N ...............................   0 7 - 4 0 - 9
R E S IS T O R   R E M O V A L /IN S T A L L A T IO N   . . .   0 7 - 4 0 - 8
R O A D  T E S T   [G F 4 A -E L ]  ............................... 0 5 - 1 7 B - 4
R O A D  T E S T   [L A 4 A - E L ]................................... 0 5 - 1 7 A - 5
R O L L O V E R   V ALVE  IN S P E C T IO N   ................ 0 1 - 1 6 - 6
R O O F   M O L D IN G   IN S T A L L A T IO N .................. 0 9 - 1 6 - 6
R O O F   M O L D IN G   R E M O V A L ........................... 0 9 - 1 6 - 6
R O O M   F U S E   IN S T A L L A T IO N   .........................0 9 - 2 1 - 1

S

S A E   S T A N D A R D S   ..............................................  0 0 - 0 0 - 8
S A S   U N IT   B R A C K E T

R E M O V A L /IN S T A L L A T IO N ............................. 0 8 - 1 0 - 6

S A S   U N IT   R E M O V A L /IN S T A L L A T IO N   . . . .   0 8 - 1 0 - 5
S C H E D U L E D   M A IN T E N A N C E   ..................  0 0 - 0 0 - 2 3
S E A T   B E LT  A L R   IN S P E C T IO N   .....................   0 8 - 1 1 - 4

S E A T   B E L T   E LR   IN S P E C T IO N   .....................   0 8 - 1 1 - 4
S E A T   B E L T   S Y M P T O M

T R O U B L E S H O O T IN G ................................... 0 8 -0 1  B -1

S E L E C T O R   L E V E R   A D J U S T M E N T  

0 5 - 1 8 - 2

S E L E C T O R   L E V E R   A N D   C A B L E

R E M O V A L /IN S T A L L A T IO N ............................. 0 5 - 1 8 - 3

S E L E C T O R   L E V E R

D IS A S S E M B L Y /A S S E M B L Y ...........................0 5 - 1 8 - 6

S E L E C T O R   L E V E R   IN S P E C T IO N   ................0 5 - 1 8 - 1

S H IF T   M E C H A N IS M  

R E M O V A L /IN S T A L L A T IO N ............................. 0 5 - 1 6 - 1

S ID E   P A N E L  R E M O V A L /IN S T A L L A T IO N   . .   0 9 - 1 7 - 7  
S ID E   P R O T E C T O R   N o.1,  N o.2

IN S T A L L A T IO N ....................................................0 9 - 1 6 - 3

S ID E   P R O T E C T O R   N o.1,  N o.2  R E M O V A L   0 9 - 1 6 - 2  
S ID E   W A L L   R E M O V A L /IN S T A L L A T IO N   . . .   0 9 - 1 7 - 8  
S IG N A L   L IG H T IN G   S Y S T E M   S Y M P T O M

T R O U B L E S H O O T IN G ................................. 0 9 - 0 1 L -1

S L ID E   M O T O R   IN S P E C T IO N   ......................... 0 9 - 1 3 - 5
S L ID IN G   S U N R O O F   S Y M P T O M

T R O U B L E S H O O T IN G ................................. 0 9 - 0 1 H -1

S O L E N O ID   B O D Y

R E M O V A L /IN S T A L L A T IO N   [L A 4 A -E L ]  .  0 5 - 1 7 A - 1 8  

S O L E N O ID   VALVE 

R E M O V A L /IN S T A L L A T IO N   [G F 4 A -E L ]  .  0 5 - 1 7 B - 1 7

S O L E N O ID   V ALV E S   IN S P E C T IO N

[G F 4 A -E L ]  .......................................................0 5 - 1 7 B - 1 6

S P A R K   P LU G   IN S P E C T IO N   [K L]  .................. 0 1 - 1 8 - 3
S T A B IL IZ E R   C O N T R O L   LIN K

IN S P E C T IO N ............................................. 0 2 - 1 3 - 6

S T A B IL IZ E R   C O N T R O L   LIN K

IN S P E C T IO N ............................................. 0 2 - 1 4 - 3

S T A R T E R   IN S P E C T IO N ......................... 0 1 - 1 9 - 2
S T A R T E R   IN T E R L O C K   S W IT C H

IN S P E C T IO N   (M TX )  .........................................0 1 - 1 9 - 2

S T A R T E R   R E M O V A L /IN S T A L L A T IO N   . . . .   0 1 - 1 9 - 1
S T E E R IN G   G E A R   A N D   L IN K A G E

D IS A S S E M B L Y /A S S E M B L Y .................0 6 - 1 2 - 9

S T E E R IN G   G E A R   A N D   L IN K A G E

IN S P E C T IO N ............................................ 0 6 - 1 2 - 1 0

S T E E R IN G   G E A R   A N D   L IN K A G E

R E M O V A L /IN S T A L L A T IO N ...................0 6 - 1 2 - 7

S T E E R IN G   L O C K   (ATX  M O D E L )

IN S P E C T IO N ........................................................0 6 - 1 2 - 6

S T E E R IN G   S H A F T   C O M P O N E N T

D IS A S S E M B L Y /A S S E M B L Y ........................... 0 6 - 1 2 - 5

S T E E R IN G   S H A F T   IN S P E C T IO N .................. 0 6 - 1 2 - 6
S T E E R IN G   W H E E L  A N D   C O L U M N

IN S P E C T IO N ........................................................0 6 - 1 2 - 3

S T E E R IN G   W H E E L   A N D   C O L U M N

R E M O V A L /IN S T A L L A T IO N ............................. 0 6 - 1 2 - 4

S U N R O O F   C O N T R O L   M O D U L E

IN S P E C T IO N ........................................................ 0 9 - 1 5 - 8

S U N R O O F   C O N T R O L   M O D U L E

R E M O V A L /IN S T A L L A T IO N ............................. 0 9 - 1 5 - 9

S U N R O O F   M O T O R   IN S P E C T IO N   ................ 0 9 - 1 5 - 6
S U N R O O F   M O T O R   IN S T A L L A T IO N   ............0 9 - 1 5 - 7
S U N R O O F   M O T O R   R E M O V A L .......................0 9 - 1 5 - 7
S U N R O O F   S W IT C H   IN S P E C T IO N  

0 9 - 1 5 - 7

S U N R O O F   S W IT C H

R E M O V A L /IN S T A L L A T IO N ............................. 0 9 - 1 5 - 7

S U N R O O F   U N IT  A S S E M B L Y   ......................... 0 9 - 1 5 - 2
S U N R O O F   U N IT   D IS A S S E M B L Y   .................. 0 9 - 1 5 - 2
S U N R O O F   U N IT

R E M O V A L /IN S T A L L A T IO N ............................. 0 9 - 1 5 - 1

S W IN G   L O U V E R   IN S P E C T IO N ..................   0 7 - 4 0 - 1 6
S W IN G   L O U V E R

R E M O V A L /IN S T A L L A T IO N .........................  0 7 - 4 0 - 1 6

S Y M P T O M   T R O U B L E S H O O T IN G   ................ 0 7 - 0 1 - 2

T

T C S   O F F   S W IT C H   IN S P E C T IO N   .................. 0 4 - 1 4 - 2
T C S   O F F   S W IT C H  

R E M O V A L /IN S T A L L A T IO N ............................. 0 4 - 1 4 - 1

A I-0 8

Summary of Contents for MX-6 1998



































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for MX-6 1998

Kargo Master 40640 Assembly Manual preview
40640
Brand: Kargo Master Pages: 5
Saab 99 Important Operatlng, Safety And Maintenance Instructions preview
99
Brand: Saab Pages: 75
Hama Cup holder Operating Instruction preview
Cup holder
Brand: Hama Pages: 2
Abarth 124 SPIDER Service And Warranty Handbook preview
124 SPIDER
Brand: Abarth Pages: 36
KAP AUDI 4G HIGHEND Manual preview
AUDI 4G HIGHEND
Brand: KAP Pages: 20
Yakima KingJoe 2 Quick Start Manual preview
KingJoe 2
Brand: Yakima Pages: 7
Yakima BowDown Quick Start Manual preview
BowDown
Brand: Yakima Pages: 6
Yakima LOCKN'LOAD Manual preview
LOCKN'LOAD
Brand: Yakima Pages: 10
Yakima HitchSki Quick Start Manual preview
HitchSki
Brand: Yakima Pages: 12
Mercedes-Benz GUARD S 500 Supplement To Operators Manual preview
GUARD S 500
Brand: Mercedes-Benz Pages: 30
REVCAMUK MON16AHD Instructions preview
MON16AHD
Brand: REVCAMUK Pages: 4
Club Car Gasoline/Electric DS Golf Car 1996 Owner'S Manual preview
Gasoline/Electric DS Golf Car 1996
Brand: Club Car Pages: 48
Actia TGU-R ACCESS User Manual preview
TGU-R ACCESS
Brand: Actia Pages: 37
P-Invent Troller User Manual preview
Troller
Brand: P-Invent Pages: 4
Subaru 1998 Forester Owner'S Manual preview
1998 Forester
Brand: Subaru Pages: 298
Audiovox AA-BAT Programming Manual preview
AA-BAT
Brand: Audiovox Pages: 3
Victory 4x4 VRKCAP Install Instructions Manual preview
VRKCAP
Brand: Victory 4x4 Pages: 9
MVG 0845 C Manual preview
0845 C
Brand: MVG Pages: 18

Brands by name

Popular brands

Load more brands