Mazda MX-6 1998, Workshop Manual

Page: 1222 / 1282

INTERIOR TRIM
TRUNK COMPARTMENT COVERING REMOVAL/INSTALLATION
W 6 U 9 1 7 W 3 0
1. Remove the rear side seat. (Refer to 09-13 REAR 6. Install in the reverse order of removal.
SEAT REMOVAL/INSTALLATION.)
2. Remove the center board and the spare tire.
3. Remove the trunk end trim. (Refer to 09-17
TRUNK END TRIM REMOVAL/INSTALLATION.)
4. Remove the fasteners.
5. Disengage the part of trunk compartment covering
B from the corner plate to remove it.
HEADLINER REMOVAL/INSTALLATION
W 6 U 9 1 7 W 3 1
1. Disconnect the negative battery cable.
2. Remove the interior light. (Refer to 09-18
INTERIOR LIGHT REMOVAL/INSTALLATION.)
3. Remove the sunroof switch. (Refer to 09-15
SUNROOF SWITCH REMOVAL/INSTALLATION.)
4. Remove the seaming welt.
5. Remove the A-pillar trim. (Refer to 09-17
A-PILLAR TRIM REMOVAL/INSTALLATION.)
6. Remove the B-pillar upper trim. (Refer to 09-17
B-PILLAR UPPER TRIM
REMOVAL/INSTALLATION.)
7. Remove the C-pillar trim. (Refer to 09-17
C-PILLAR TRIM REMOVAL/INSTALLATION.)
8. Remove the rear console. (Refer to 09-17 REAR
CONSOLE REMOVAL/INSTALLATION.)
9. Remove the sunvisors and the assist handles.
10. Remove the fasteners.
MTX. Move the shift lever to 1 position if equipped
with ATX.
0 9 -1 7 -1 4