Mazda MX-6 1998, Workshop Manual

Page: 1196 / 1282

SLIDING SUNROOF
Rivet Removal Note
• Remove the rivets from the deflector by using a
drill or cutting pliers.
Rivet Installation Note
• Install the rivets to the deflector by using a hand
riveter.
W 6 U 9 1 5 W A Q W 6 U 9 1 5 W A R
FRONT DRAIN HOSE REMOVAL
1. Remove the headliner. (Refer to 09-17
HEADLINER REMOVAL/INSTALLATION.)
2. Remove the front drain hose from the clips.
3. Pull the front drain hose into the room side.
4. Remove the front drain hose.
CLIP CLIP CLIP
W 6 U 9 1 5 W 0 5
CLIP
SEC. A -A SEC. B-B SEC. C -C SEC. D-D
W 6 U 9 1 5 W A D
FRONT DRAIN HOSE INSTALLATION
W 6 U 9 1 5 W 0 6
1. Apply soapy water to the front drain hose inserting 3. Install the headliner. (Refer to 0 9 -1 7 HEADLINER
area. REMOVALVINSTALLATION.)
2. Insert one end of the front drain hose into the
sunroof frame, set the hose along the clips, and
insert the front drain hose joint into the hinge pillar
inner hole.
0 9 -1 5 -4