Mazda MX-6 1998, Workshop Manual

Page: 1138 / 1282

DOORS AND LIFTGATE
6. Adjust the front door gap and height. (Refer to
09-11 FRONT DOOR ADJUSTMENT.)
N-m {kgf-m, ft lbf}
W 6 U 9 1 1 W A 1
1 Connector
id
- Removal Note
e
? installation Note
2 Checker pin
3
Door hinge
4
Front door
5 Checker
Connector Removal Note
1. Remove the rubber boot from the connector.
2. Pull out the connector from the body.
3. Pull the green pin out until it stops.
4. Disconnect the connector.
Connector Installation Note
1. Install the rubber boot to the connector.
2. Connect the connector.
3. Push the green pin in until it stops for locking the
connector.
4. Install the connector to the body with pushing the
both side ribs.
FRONT DOOR WEATHERSTRIP REMOVAL/INSTALLATION
W 6 U 9 1 1 W 0 3
1. Remove the checker pin. 4. Install in the reverse order of removal.
2. Disengage the clips by using a fastener remover.
3. Remove the front door weatherstrip.
W 6 U 9 1 1 W A 2
0 9 -1 1 -2