Mazda MX-6 1998, Workshop Manual

Page: 795 / 1282

CLUTCH
CLUTCH DISC INSPECTION
1. Using vernier calipers, measure the thickness of
the lining at a rivet head on both sides. Replace
the clutch disc if its thickness is less than the
minimum.
Thickness
0.3 mm {0.012 in} min.
W 6 U 5 1 0 W 1 2
2. Measure the clutch disc runout by using a dial
indicator. Replace the clutch disc if runout is
excessive.
Runout
0.7 mm {0.0276 in} max.
W 6 U 5 1 0 W A K
CLUTCH RELEASE COLLAR INSPECTION
W 6 U 5 1 0 W 1 3
Caution 2. If the collar sticks or has excessive resistance,
• Cleaning the clutch release collar with replace it.
cleaning fluids or a steam cleaner can
wash the grease out of the sealed bearing.
1. Turn the collar while applying force in the axial
direction.
PILOT BEARING INSPECTION
W 6 U 5 1 0 W 1 4
1. Without removing the pilot bearing from the 2. If the bearing sticks or has excessive resistance,
flywheel, turn the bearing while applying force in replace it.
the axial direction.
W 6 U 5 1 0 W A M
0 5 -1 0 -1 0