Mazda MX-6 1998, Workshop Manual

Page: 482 / 1282

EXHAUST SYSTEM
EXHAUST SYSTEM IN S P E C T IO N 01 -1 5 -1 EXHAUST SYSTEM
EXHAUST SYSTEM REMOVAL/INSTALLATION [KL] 0 1 -1 5 -2
REMOVAL/INSTALLATION [F S ] 01-15-1
01-15 EXHAUST SYSTEM
EXHAUST SYSTEM INSPECTION
W 6 U 1 1 5 W 0 1
1. Start the engine and check each exhaust system component for exhaust gas leakage.
2. If leakage is found, repair or replace as necessary.
EXHAUST SYSTEM REMOVAL/INSTALLATION [FS]
W 6 U 1 1 5 W 0 2
Warning
•
When the engine and exhaust system are hot, they can badly burn. Turn off the engine and wait
until they are cool before removing or installing the exhaust system.
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install In the reverse order of removal.
16—22 {1.6— 2.3,12—22}
20—28 {2.0—2.9 ,14—20}
38— 51 {3.8— 5.3, 28— 38}
7.9— 10.7 N m
{80— 110 kgf-cm,
69.5—95.4 in lb f}
64—89 {6.5— 9.1,48—65}
19— 25 {1 .9 -2 .6 ,1 4 — 18}
N-m {kgf-m, ft-lbf}
' ONLY FOR CALIFORNIA MODEL weuii
5
WAi
38— 51 {3.8— 5.3,28— 38}
7.9— 10.7 N m
{80— 110 kgf-cm,
69.5— 95.4 In lb f)
64—89 {6.5—9.1,48—65}
1
Main silencer
2
Presilencer
3
Three way catalytic converter
4
Heated oxygen sensor (Rear (Except California))
5 Front pipe
6 Heated oxygen sensor (Rear (California only).
Front (Except California))
7 Warm up three way catalytic converter (California
only)
0 1 -1 5 -1