Mazda MX-6 1998, Workshop Manual, Page: 439 / 1282

MECHANICAL [KL]
1 No.5 engine mount rubber
2 Engine mount member
3 No.1 engine mount stay bracket
4 No.3 engine mount rubber
5 No.1 engine mount bolt and nut
6
No.4 engine mount rubber
7 No.4 engine mount bracket
tr
Installation Note
8 Engine, transaxle
ENGINE DISASSEMBLY/ASSEMBLY [KL]
W6U110W22
1. Disconnect the engine and transaxle. (Refer to 05-15 TRANSAXLE REMOVAL/INSTALLATION.) (Refer to
0 5 -1 7B TRANSAXLE REMOVAL/INSTALLATION [GF4A-EL].)
2. Remove the intake-air system.
3. Remove the exhaust system.
4. Remove the oil filter. (Refer to 01-11 OIL FILTER, Oil Filter Replacement.)
5. Remove the ignition coil.
6. Remove the generator.
7. Disassemble in the order indicated in the table.
8. Assemble in the reverse order of disassembly.
1 A/C compressor bracket
N m {kgf-m, ft lbf}
W6U110WDT
2 Generator bracket ~|
No.4 Engine Mount Bracket Installation Note
• Tighten the bolt in the order shown.
W6U110WDS
19—25 {1.9-2.6,
01-1 O B -18