Mazda MX-6 1998, Workshop Manual

Page: 886 / 1282

ENGINE SPEED SENSING POWER STEERING
Note
• To determine whether the steering effort is
satisfactory or not, perform the inspection on
another vehicle of the same model and under
the same conditions, and compare the results.
• The steering wheel effort varies with
conditions as shown below.
1. Road conditions, such as dry or wet, and
asphalt or concrete.
2. Tire conditions, such as brand, wear, and
tire pressure.
6. If not within the specification, note the following:
(1) Air in system
(2) Fluid leakage at hose or connectors
(3) Function of oil pump and steering gear
N m {kgf-m , tt lbf)
W 6 U 6 1 2 W A 7
STEERING W HEEL AND COLUMN REMOVAL/INSTALLATION
W 6 U 6 1 2 W 0 4
1. Remove in the order indicated in the table.
2. Install in the reverse order of removal.
2 9 — 3 6 }
1 Air bag module
tr 0 8 -1 0 DRIVER-SIDE AIR BAG MODULE
REMOVAL/INSTALLATION
2 Locknut
3 Steering wheel
tr Removal Note
tr Installation Note
4 Column cover
5 Combination switch
6 Side panel
tr 0 9 -1 7 SIDE PANEL
REMOVAL/INSTALLATION
7
Lower panel
8 Key interlock cable (ATX)
9
Steering shaft component
tr Installation Note
10 Bracket
11 Intermediate shaft
tr Installation Note
12 Shaft seal
13 Set plate
14 Dust cover
15 Universal joint
0 6 -1 2 -4