Mazda MX-6 1998, Workshop Manual

Page: 391 / 1282

TROUBLESHOOTING [CRUISE CONTROL SYSTEM]
STEP
INSPECTION ACTION
6
Inspect horn.
Does it sound? Yes Go to next step.
No Inspect connection of clock spring connector (4-pin). If no
concern is found, go to next step. If poor connections are
found, make sure they are securely connected and then
go to step 37.
7 Perform engine On-Board Diagnosis.
Are following DTCs indicated?
x t
0 1 -0 1 A ENGINE ON-BOARD
DIAGNOSIS (FS)
xr 01-01B ENGINE ON-BOARD
DIAGNOSIS (KL)
• P0500, P1500, P1501
• (KL) P0703
• (FS )P 1703
Yes Repair damaged area by following inspection by
applicable DTC of PCM.
No Go to next step.
8 Inspect STOP 15 A fuse and TURN 10 A fuse.
Are they okay?
Yes Go to next step.
TURN
10 A FUSE
o
m
STOP
15 A FUSE
W6U1O1WP0
No Replace fuse, then go to step 37. If fuse melts immediately
after replacement, then go to step 18, 25, 23, and 31.
9
Inspect connection of actuator cable to
accelerator pedal and cruise actuator link. Are
they securely and properly connected?
Yes Go to next step.
No Connect actuator cable securely and properly, then go to
step 37.
10 Remove actuator cable on cruise actuator
side.
Hold the end of cruise actuator cable by hand.
Inspect actuator cable operation by
depressing and releasing the accelerator
pedal.
Is it okay?
Yes Reinstall actuator cable.
Go to next step.
No
Replace actuator cable, then go to step 37.
11
Inspect actuator cable play.
x t
0 1 -2 0 ACTUATOR CABLE
ADJUSTMENT
Is it okay?
Yes Go to next step.
No Adjust the play, then go to step 37.
12
Inspect brake pedal height and free play on
vehicle.
x t
04-11 BRAKE PEDAL INSPECTION
Is it okay?
Yes
For ATX vehicle, go to step 16.
For MTX vehicle, go to next step.
No Adjust brake pedal height or brake pedal play, then go to
step 37.
13
Inspect clutch pedal height and free play on
vehicle.
0 7
0 5 -1 0 CLUTCH PEDAL ADJUSTMENT
Is it okay?
Yes Go to next step.
No
Adjust clutch pedal height or clutch pedal play, then go to
step 37.
0 1 -0 1 C -3