Mazda MX-6 1998, Workshop Manual

Page: 979 / 1282

SEAT BELT
08-11 SEAT BELT
FRONT SEAT BELT
REMOVAL/INSTALLATION ....................08-11-1
REAR SEAT BELT
REM OVAL/INSTALLATION....................0 8 -1 1 -2
REAR CENTER SEAT BELT
REM OVAL/INSTALLATION....................0 8 -1 1 -2
FRONT BUCKLE
REMOVAL/INSTALLATION ....................0 8 -1 1 -3
Driver’s Side ........................................... 0 8 -1 1 -3
Passenger’s Side ................................... 0 8 -1 1 -3
BUCKLE SWITCH INSPECTION ............ 0 8 -1 1 -3
REAR BUCKLE
REMOVAL/INSTALLATION.................... 0 8 -1 1 -4
SEAT BELT ELR IN S P E C T IO N ................ 0 8 -1 1 -4
SEAT BELT ALR IN S P E C TIO N ................ 0 8 -1 1 -4
FRONT SEAT BELT REMOVAL/INSTALLATION
Caution
•
Do not disassemble the retractor. The
emergency locking retractor (ELR) has a
spring that will unwind if the retractor is
disassembled. The spring cannot be
rewound by hand. If this occurs, the ELR
will not work properly.
1. Remove the B-pillar lower trim. (Refer to 09-
B-PILLAR LOWER TRIM
REMOVAL/INSTALLATION.)
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
17
W6U811WA0
1 Cover
2 Bolt
3
Screw
4 Front seat belt
0 8 -1 1 -1