Mazda MX-6 1998, Workshop Manual, Page: 1250 / 1282

ENTERTAINMENT
REAR ANTENNA FEEDER REMOVAL/INSTALLATION
W 6 U 9 2 0 W 0 7
1. Disconnect the negative battery cable.
2. Remove the rear console. (Refer to 09-17 REAR CONSOLE REMOVAL/INSTALLATION.)
3. Turn over the floor covering from passenger’s side. (Refer to 09-17 FLOOR COVERING
REMOVAL/INSTALLATION.)
4. Turn over the trunk compartment covering from passenger’s side. (Refer to 09-17 TRUNK COMPARTMENT
COVERING REMOVAL/INSTALLATION.)
5. Disconnect the rear antenna feeder.
6. Remove in the order Indicated in the table.
7. Install in the reverse order of removal.
W 6 U 9 2 0 W A 9
1 Clip Rear antenna feeder
REAR ANTENNA FEEDER INSPECTION
1. Remove the rear antenna feeder. (Refer to 09-20
REAR ANTENNA FEEDER
REMOVAL/INSTALLATION.)
2. Verify that there is no continuity between rear
antenna feeder terminals A and B by using an
ohmmeter.
3. Check for continuity between the rear antenna
feeder terminals by using an ohmmeter.
: Continuity
Step
Terminal
A B
c D
1
O
------
---- 0
2
O
— —
o
W 6 U 9 2 0 W A A
4. If not as specified, replace the rear antenna
feeder.
W 6 U 9 2 0 W 0 8
W 6 U 9 2 0 W A B
0 9 -2 0 -4