Mazda MX-6 1998, Workshop Manual

Page: 937 / 1282

CONTROL SYSTEM
AIR MIX ACTUATOR REMOVAL/INSTALLATION
1. D is c o n n e c t th e n e g a tiv e b a tte ry cable.
2. Remove the glove compartment.
3. Remove in the order indicated in the table.
4. Install in the reverse order of removal.
W 6 U 7 4 0 W 0 9
1 Connector
2 Screw
3
Air mix actuator
AIR MIX ACTUATOR INSPECTION
W 6 U 7 4 0 W 1 0
1. Remove the air mix actuator.
2. Connect battery positive voltage to terminal D and
ground to terminal H, and battery positive voltage
to terminal H and ground to terminal D of the air
mix actuator.
3. Verify that the air mix actuator operates as shown
below.
HOT COLD HOT COLD
W 6 U 7 4 0 W A E
AIR MIX ACTUATOR POSITION
W 6 U 7 4 0 W A G
5. If n o t as s p e c ifie d , re p la c e th e a ir m ix a ctu a to r.
4. V e rify th a t th e re s is ta n c e b e tw e e n th e te rm in a ls of
th e a ir m ix a c tu a to r is a s s h o w n in th e g ra p h .
kii
2.7
BETWEEN C AND F BETWEEN F AND G
TERMINALS TERMINALS
Connection
Movement
HOT—»COLD
COLD-»HOT
MAX HOT
MAX COLD
W 6 U 7 4 0 W A F
0 7 -4 0 -5