Mazda MX-6 1998, Workshop Manual, Page: 863 / 1282

AUTOMATIC TRANSAXLE [GF4A-EL]
Torque Converter Nuts Removal Note
Hold the drive plate and remove the torque converter
nuts.
W 6 U 5 1 7 W E 5
Transaxle Removal Note
1. Loosen the SST (engine support) and lean the
engine toward the transaxle.
5. Suspend the drive shaft with a rope.
6. Install the
SST into the transaxle to hold the side
gear.
W 6 U 5 1 7 W E 3
Engine Mounting Member Removal Note
Caution
•
To prevent damage to the body, insert a
rag into the gap between the fender and
body, when installing the SST.
1. Support the engine by using the SST before
removing the engine mounting member.
2. Remove the engine mounting member.
Warning
• Verify that the transaxle is securely
supported by the jack. If the transaxle
should fall, serious injury or death and
damage to the vehicle could result. Before
removing the transaxle make sure that the
jack is securely supporting it.
2. Support the transaxle on a jack.
3. Remove the transaxle mounting bolts.
4. Remove the transaxle.
W 6 U S 1 7 W E 4
W 6 U 5 1 7 W E 6
0 5 -1 7 B -2 3