Mazda MX-6 1998, Workshop Manual, Page: 483 / 1282

EXHAUST SYSTEM
8 Heated oxygen sensor (Front (California only))
9 Exhaust manifold insulator
10 Exhaust manifold
EXHAUST SYSTEM REMOVAL/INSTALLATION [KL]
W 6 U 1 1 5 W 5 2
Warning
•
When the engine and exhaust system are hot, they can badly burn. Turn off the engine and wait
until they are cool before removing or installing the exhaust system.
1. Disconnect the negative battery cable.
2. Remove in the order indicated in the table.
3. Install in the reverse order of removal.
1 Main silencer
2
Presilencer
3 Heated oxygen sensor (Rear)
4 Three way catalytic converter
5
Heated oxygen sensor (Middle)
6 Front pipe
7 Heated oxygen sensor (Front RH)
8 Heated oxygen sensor (Front LH)
9 Exhaust manifold insulator
10 Exhaust manifold
0 1 -1 5 -2