Mazda MX-6 1998, Workshop Manual, Page: 599 / 1282

REAR AXLE
03-12 REAR AXLE
WHEEL HUB, HUB SPINDLE PREINSPECTION
(DRUM BRAKE MODEL) ........................03-12-1
Wheel Bearing Play Inspection ............ 03-12-1
WHEEL HUB, HUB SPINDLE
REMOVAL/INSTALLATION
(DRUM BRAKE MODEL) ........................0 3 -1 2 -2
Locknut Removal Note .......................... 0 3 -1 2 -2
ABS Sensor Rotor (With ABS)
Removal N o te ....................................... 0 3 -1 2 -3
ABS Sensor Rotor (With ABS)
Installation Note ................................... 0 3 -1 2 -3
Locknut Installation N o te ........................ 0 3 -1 2 -3
WHEEL HUB, HUB SPINDLE PREINSPECTION
(DISC BRAKE MODEL) .......................... 0 3 -1 2 -3
Wheel Bearing Play Inspection ............ 0 3 -1 2 -3
WHEEL HUB BOLT REPLACEMENT .. 0 3 -1 2 -3
WHEEL HUB, HUB SPINDLE
REMOVAL/INSTALLATION
(DISC BRAKE MODEL) .......................... 0 3 -1 2 -4
WHEEL HUB, HUB SPINDLE PREINSPECTION (DRUM BRAKE MODEL)
W 6 U 3 1 2 W 0 1
Wheel Bearing Play Inspection
1. Position a dial indicator against the brake drum.
Push and pull the rear brake component by hand
in the axial direction and measure the wheel
bearing play.
2. If the bearing play exceeds the specification, first,
replace and tighten the locknut to the specified
torque, then replace the wheel hub component as
necessary.
Wheel bearing play
0.1 mm {0.004 in}
W 6 U 3 1 2 W A 0
0 3 -1 2 -1