Mazda MX-6 1998, Workshop Manual, Page: 1099 / 1282

TROUBLESHOOTING [INSTRUMENTATION/DRIVER INFO.]
STEP INSPECTION ACTION
Turn ignition switch to ON.
Measure voltage at terminal 3N at instrument
cluster (14-pin) connector of wiring harness.
Is voltage B+?
t r = - nn
.iM -r r r i m r i i i I i i i
W 6 U 9 0 1 W U 3
Yes Go to next step.
No Repair wiring harness between METER 10 A fuse and
instrument cluster.
Turn ignition switch to LOCK.
Check for continuity between terminal 2B at
instrument cluster (14-pin) connector of wiring
harness and ground.
Is there continuity?
Yes
Go to next step.
No Repair wiring harness between instrument cluster and
ground.
Disconnect print plate connector.
Check for continuity between terminal 2K
(14-pin) at print plate and print plate connector
4B (8-pin) terminal.
Is there continuity?
Yes Go to next step.
No Replace print plate.
o - 09-22 INSTRUMENT CLUSTER
DISASSEMBLY/ASSEMBLY
0 9 -0 1 P -3