Mazda MX-6 1998, Workshop Manual

Page: 1158 / 1282

GLASS/WINDOWS/MIRRORS
rQ — GXDi
6. If not as specified, replace the power outside
mirror.
D O W N U P
L E F T
~ < M >
R I G H T
I
D C *
I
A
W 6 U 9 1 2 W B L
POWER OUTSIDE MIRROR REMOVAMNSTALLATION
W 6 U 9 1 2 W 2 6
1. Disconnect the negative battery cable.
2. Remove the inner garnish.
3. Remove the front door trim. (Refer to 09-17
FRONT DOOR TRIM
REMOVAL/INSTALLATION.)
4. Partially peel off the door screen.
5. Disconnect the connector.
6. Remove the nuts and the power outside mirror.
2.47—3.52
POWER OUTSIDE MIRROR
DOOR SCREEN
N m {kgf-cm , in lbf}
W 6 U 9 1 2 W B M
7. Install in the reverse order of removal.
MANUAL OUTSIDE MIRROR REMOVAL/INSTALLATION
1. Remove the inner garnish.
2. Remove the nuts and the manual outside mirror.
MANUAL OUTSIDE MIRROR
N 'in {k g f.c m , ln -lb f)
W 6 U 9 1 2 W B N
W 6 U 9 1 2 W 2 7
3. Install in the reverse order of removal.
POWER OUTSIDE MIRROR GLASS REMOVAL
W 6 U 9 1 2 W 2 8
1. Warm the frame and the mirror glass to
approximately 70 °C (158 °F} for 3 minutes by --------
using a hot air blower.
2. Put on gloves and protective eye wear. — "
3. Insert a scraper between the mirror glass and the
/
frame, and pry the glass loose.
s c r a p e r
W6U912WBP
MIRROR GLASS
0 9 -1 2 -1 7